Wood

We make doors with square joints and also miter doors. The wood species we use are: maple, red oak, cherry & mahogany. All our wood products sell raw, not painted. You can buy wood doors either here or by using our Create Doors tool on the menu, it would give you the chance to play with combinations until getting the design you like. However, if...

We make doors with square joints and also miter doors. The wood species we use are: maple, red oak, cherry & mahogany. All our wood products sell raw, not painted. You can buy wood doors either here or by using our Create Doors tool on the menu, it would give you the chance to play with combinations until getting the design you like. However, if you want to save that time you could just order from the most common designs displayed here. Usually, the wood we use is 3/4" thick and the maximum width and height are 48" x 96". Our wood is very clean regarding grain though it is not selected. 

Because wood is susceptible to changes in temperature and humidity, joineries to form the face frame can expand and contract exposing visible gaps. Staining and finishing the face frame can enhance this visibility. Lighter colored paint finishes in particular actually accent this gap making it stand out even more. A gap of .010" is acceptable and would not be considered a defect.

Dimensional size tolerances for all Dade Doors Inc products will be +/- 1/16 of an inch.

When wood is exposed to variations in temperature and humidity the moisture content in the wood reflects these changes and its natural response is to grow or shrink in the direction of the grain or slightly twist or bow. Doors up to 24" wide and 44" in height have a warp tolerance of .25". Doors exceeding these dimensions are not warranted against warping. Frames only and recessed panel doors up to 24" wide and 41" in height have a warp tolerance of .25". Doors and frames exceeding these dimensions are not warranted against warping.

More

Wood  There are 66 products.

per page
Showing 1 - 40 of 66 items
  • B7-R4-P6-SQ usually known as "shaker”, is a modern, trending, flat and insert ¼”panel design with square joints and edges. It is a plain and elegant style. The rail size is about 2 1/4". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B7-R4-P6-SQ and you can also make it slab:... B7-R4-P6-SQ usually known as "shaker”, is a modern, trending, flat and insert ¼”panel design with...

    SKU: B7-R4-P6-SQ
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B7 | Rail: R4 | Panel: P6 |
  • F-B6-R5-P6-SQ is the drawer front belonging to the door style: B6-R5-P6-SQ. It is a modern, trending and flat insert ¼”panel design with a bevel edge and frame, square joints and a line/groove that cuts the rail on the sides. It is a plain and elegant style. The rail size is about 2 1/4". The flat panel is made of wood veneer MDF. The thickness of the... F-B6-R5-P6-SQ is the drawer front belonging to the door style: B6-R5-P6-SQ. It is a modern,...

    SKU: F-B6-R5-P6-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B6 | Rail: R5 | Panel: P6 |
  • B6-R5-P6-SQ is a modern, trending and flat insert ¼”panel design with a bevel edge and frame, square joints and a line/groove that cuts the rail on the sides. It is a plain and elegant style. The rail size is about 2 1/4". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. The corresponding drawer front for it is... B6-R5-P6-SQ is a modern, trending and flat insert ¼”panel design with a bevel edge and frame,...

    SKU: B6-R5-P6-SQ
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B6 | Rail: R5 | Panel: P6 |
  • F-B7-R4-P6-SQ usually known as "shaker”, is the drawer front belonging to the door style: B7-R4-P6-SQ. It is a modern, trending, flat and insert ¼”panel design with square joints and edges. It is a plain and elegant style. The rail size is about 2 1/4". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. Please notice the... F-B7-R4-P6-SQ usually known as "shaker”, is the drawer front belonging to the door style:...

    SKU: F-B7-R4-P6-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B7 | Rail: R4 | Panel: P6 |
  • B7-slab is a slab/flat piece of wood with straight edge (B7) all around. It is meant for fillers or small drawer fronts when there is no room for design. The thickness of the wood we use is ¾”. Please notice the picture you see is meant to help you choose the design of your product, not the color. All our wood products sell raw. B7-slab is a slab/flat piece of wood with straight edge (B7) all around. It is meant for fillers...

    SKU: B7-SLAB
    | Face Type: Door | Door Type: Slab | Edge: B7 |
  • B6-slab is a slab/flat piece of wood with a bevel edge (B6) all around. It is meant for fillers or small drawer fronts when there is no room for design. The thickness of the wood we use is ¾”. Please notice the picture you see is meant to help you choose the design of your product, not the color. All our wood products sell raw. B6-slab is a slab/flat piece of wood with a bevel edge (B6) all around. It is meant for fillers...

    SKU: B6-SLAB
    | Face Type: Door | Door Type: Slab | Edge: B6 |
  • B5-slab is a slab/flat piece of wood with an ogee edge (B5) all around. It is meant for fillers or small drawer fronts when there is no room for design. The thickness of the wood we use is ¾”. Please notice the picture you see is meant to help you choose the design of your product, not the color. All our wood products sell raw. B5-slab is a slab/flat piece of wood with an ogee edge (B5) all around. It is meant for fillers...

    SKU: B5-SLAB
    | Face Type: Door | Door Type: Slab | Edge: B5 |
  • B1-slab is a slab/flat piece of wood with an ogee edge (B1) all around. It is meant for fillers or small drawer fronts when there is no room for design. The thickness of the wood we use is ¾”. Please notice the picture you see is meant to help you choose the design of your product, not the color. All our wood products sell raw. B1-slab is a slab/flat piece of wood with an ogee edge (B1) all around. It is meant for fillers...

    SKU: B1-SLAB
    | Face Type: Door | Door Type: Slab | Edge: B1 |
  • B2-slab is a slab/flat piece of wood with an ogee edge (B2) all around. It is meant for fillers or small drawer fronts when there is no room for design. The thickness of the wood we use is ¾”. Please notice the picture you see is meant to help you choose the design of your product, not the color. All our wood products sell raw. B2-slab is a slab/flat piece of wood with an ogee edge (B2) all around. It is meant for fillers...

    SKU: B2-SLAB
    | Face Type: Door | Door Type: Slab | Edge: B2 |
  • B4-slab is a slab/flat piece of wood with a demi bullnose edge (B4) all around. It is meant for fillers or small drawer fronts when there is no room for design. The thickness of the wood we use is ¾”. Please notice the picture you see is meant to help you choose the design of your product, not the color. All our wood products sell raw. B4-slab is a slab/flat piece of wood with a demi bullnose edge (B4) all around. It is meant for...

    SKU: B4-SLAB
    | Face Type: Door | Door Type: Slab | Edge: B4 |
  • B7-R3-P3-SQ is a very popular hip raised panel design with square joints, a kind of bevel on the inside edge of the frame and square outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B7-R3-P3-SQ and you can also make it slab: F-B7-SLAB. Please notice the picture you see is meant... B7-R3-P3-SQ is a very popular hip raised panel design with square joints, a kind of bevel on the...

    SKU: B7-R3-P3-SQ
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B7 | Rail: R3 | Panel: P3 |
  • F-B7-R3-P3-SQ is the drawer front belonging to the door style: B7-R3-P3-SQ. It is a very popular hip raised panel design with square joints, a kind of bevel on the inside edge of the frame and square outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1... F-B7-R3-P3-SQ is the drawer front belonging to the door style: B7-R3-P3-SQ. It is a very popular...

    SKU: F-B7-R3-P3-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B7 | Rail: R3 | Panel: P3 |
  • F-B7-R1-P5-SQ is the drawer front belonging to the door style: B7-R1-P5-SQ. It is a grooved reverse panel design with square joints, a quarter round bead on the inside edge of the frame and square outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½”... F-B7-R1-P5-SQ is the drawer front belonging to the door style: B7-R1-P5-SQ. It is a grooved...

    SKU: F-B7-R1-P5-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B7 | Rail: R1 | Panel: P5 |
  • B7-R1-P5-SQ is a grooved reverse panel design with square joints, a quarter round bead on the inside edge of the frame and square outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B7-R1-P5-SQ and you can also make it slab: F-B7-SLAB. Please notice the picture you see is meant to... B7-R1-P5-SQ is a grooved reverse panel design with square joints, a quarter round bead on the...

    SKU: B7-R1-P5-SQ
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B7 | Rail: R1 | Panel: P5 |
  • B5-R2-P2-SQ is a tulip raised panel design with square joints, a round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B5-R2-P2-SQ and you can also make it slab: F-B5-SLAB. Please notice the picture you see is meant to help you... B5-R2-P2-SQ is a tulip raised panel design with square joints, a round bead on the inside edge of...

    SKU: B5-R2-P2-SQ
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B5 | Rail: R2 | Panel: P2 |
  • B1-R1-P8-SQ is a reversed panel design with grooves and square joints, a quarter round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B1-R1-P8-SQ. Please notice the picture you see is meant to help you choose the design of your... B1-R1-P8-SQ is a reversed panel design with grooves and square joints, a quarter round bead on...

    SKU: B1-R1-P8-SQ
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B1 | Rail: R1 | Panel: P8 |
  • F-B1-R1-P8-SQ is the drawer front belonging to the door style: B1-R1-P8-SQ. It is a reversed panel design with grooves and square joints, a quarter round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about... F-B1-R1-P8-SQ is the drawer front belonging to the door style: B1-R1-P8-SQ. It is a reversed...

    SKU: F-B1-R1-P8-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B1 | Rail: R1 | Panel: P8 |
  • F-B1-R1-P1-SQ is the drawer front belonging to the door styles: B1-R1-P1-SQ and B1-R1-P1-CA. It is a very popular swoop raised panel design with square joints, a quarter round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. Please notice the reduced rails running... F-B1-R1-P1-SQ is the drawer front belonging to the door styles: B1-R1-P1-SQ and B1-R1-P1-CA. It...

    SKU: F-B1-R1-P1-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B1 | Rail: R1 | Panel: P1 |
  • F-B5-R2-P2-SQ is the drawer front belonging to the door style: B5-R2-P2-SQ. It is a tulip raised panel design with square joints, a round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall.... F-B5-R2-P2-SQ is the drawer front belonging to the door style: B5-R2-P2-SQ. It is a tulip raised...

    SKU: F-B5-R2-P2-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B5 | Rail: R2 | Panel: P2 |
  • B1-R1-P1-SQ is a very popular swoop raised panel design with square joints, a quarter round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B1-R1-P1-SQ and you can also make it slab: F-B1-SLAB. Please notice the picture you see... B1-R1-P1-SQ is a very popular swoop raised panel design with square joints, a quarter round bead...

    SKU: B1-R1-P1-SQ
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B1 | Rail: R1 | Panel: P1 |
  • F-B2-R1-P3-SQ is the drawer front belonging to the door style: B2-R1-P3-AR. It is a hip raised panel design with square joints, a quarter round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall.... F-B2-R1-P3-SQ is the drawer front belonging to the door style: B2-R1-P3-AR. It is a hip raised...

    SKU: F-B2-R1-P3-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B2 | Rail: R1 | Panel: P3 |
  • B4-R1-P2-SQ is a tulip raised panel design with square joints, a quarter round bead on the inside edge of the frame and a demi bullnose outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B4-R1-P2-SQ and you can also make it slab: F-B4-SLAB. Please notice the picture you see is... B4-R1-P2-SQ is a tulip raised panel design with square joints, a quarter round bead on the inside...

    SKU: B4-R1-P2-SQ
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B4 | Rail: R1 | Panel: P2 |
  • F-B4-R1-P2-SQ is the drawer front belonging to the door style: B4-R1-P2-SQ. It is a tulip raised panel design with square joints, a quarter round bead on the inside edge of the frame and a demi bullnose outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about... F-B4-R1-P2-SQ is the drawer front belonging to the door style: B4-R1-P2-SQ. It is a tulip raised...

    SKU: F-B4-R1-P2-SQ
    | Face Type: Drawer Front | Door Style: Square | Door Type: Regular | Edge: B4 | Rail: R1 | Panel: P2 |
  • B1-R1-P1-CA is a very popular cathedral swoop raised panel design with square joints, a quarter round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B1-R1-P1-SQ and you can also make it slab: F-B1-SLAB. Please notice the... B1-R1-P1-CA is a very popular cathedral swoop raised panel design with square joints, a quarter...

    SKU: B1-R1-P1-CA
    | Face Type: Door | Door Style: Upper Cathedral | Door Type: Regular | Edge: B1 | Rail: R1 | Panel: P1 |
  • B2-R1-P3-AR is an arched, hip raised panel design with square joints, a quarter round bead on the inside edge of the frame and an ogee outside edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B2-R1-P3-SQ and you can also make it slab: F-B2-SLAB. Please notice the picture you see is... B2-R1-P3-AR is an arched, hip raised panel design with square joints, a quarter round bead on the...

    SKU: B2-R1-P3-AR
    | Face Type: Door | Door Style: Upper Arch | Door Type: Regular | Edge: B2 | Rail: R1 | Panel: P3 |
  • 45°-R9-P6 is a mitered door flat insert ¼” panel design. The rail size is about 2 7/8". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-45°-R9-P6. Please notice the picture you see is meant to help you choose the design of your door, not the color. All our wood doors are raw. 45°-R9-P6 is a mitered door flat insert ¼” panel design. The rail size is about 2 7/8". The flat...

    SKU: 45°-R9-P6
    | Face Type: Door | Door Type: Miter 45° | Rail: 45-R9 | Panel: P6 |
  • B1-45°-R13-P7 is a mitered door flat insert ¼”panel design with V-beads and an ogee edge. The rail size is about 2 1/2". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B1-45°-R13-P7 and you can also make it slab: F-B1-SLAB. Please notice the picture you see is meant to help you... B1-45°-R13-P7 is a mitered door flat insert ¼”panel design with V-beads and an ogee edge. The...

    SKU: B1-45°-R13-P7
    | Face Type: Door | Door Type: Miter 45° | Edge: B1 | Rail: 45-R13 | Panel: P7 |
  • F-B1-45°-R13-P7 is the drawer front belonging to the door style: B1-45°-R13-P7. It is a mitered flat insert ¼”panel design with V-beads and an ogee edge. The rail size is about 2 1/2". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall. Please... F-B1-45°-R13-P7 is the drawer front belonging to the door style: B1-45°-R13-P7. It is a mitered...

    SKU: F-B1-45°-R13-P7
    | Face Type: Drawer Front | Door Type: Miter 45° | Edge: B1 | Rail: 45-R13 | Panel: P7 |
  • F-45°-R9-P6 is the drawer front belonging to the door style: 45°-R9-P6. It is a mitered flat insert ¼”panel design. The rail size is about 2 7/8". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall. Please keep in mind the picture you see is... F-45°-R9-P6 is the drawer front belonging to the door style: 45°-R9-P6. It is a mitered flat...

    SKU: F-45°-R9-P6
    | Face Type: Drawer Front | Door Type: Miter 45° | Rail: 45-R9 | Panel: P6 |
  • B1-45°-R7-P6 is a mitered door flat insert ¼”panel design with an ogee edge. The rail size is about 2 1/2". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B1-45°-R7-P6 and you can also make it slab: F-B1-SLAB. Please notice the picture you see is meant to help you choose the... B1-45°-R7-P6 is a mitered door flat insert ¼”panel design with an ogee edge. The rail size is...

    SKU: B1-45°-R7-P6
    | Face Type: Door | Door Type: Miter 45° | Edge: B1 | Rail: 45-R7 | Panel: P6 |
  • F-B1-45°-R7-P6 is the drawer front belonging to the door style: B1-45°-R7-P6. It is a mitered door flat insert ¼”panel design with an ogee edge. The rail size is about 2 1/2". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall. Please keep in... F-B1-45°-R7-P6 is the drawer front belonging to the door style: B1-45°-R7-P6. It is a mitered...

  • B1-45°-R17-P9 is a mitered door step raised panel design with an ogee edge. The rail size is about 2 7/8". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B1-45°-R17-P9. Please notice the picture you see is meant to help you choose the design of your door, not the color. All our wood doors are raw. B1-45°-R17-P9 is a mitered door step raised panel design with an ogee edge. The rail size is...

    SKU: B1-45°-R17-P9
    | Face Type: Door | Door Type: Miter 45° | Edge: B1 | Rail: 45-R17 | Panel: P9 |
  • 45°-R18-P9 is a mitered door step raised panel design. The rail size is about 2 7/8". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-45°-R18-P9. Please notice the picture you see is meant to help you choose the design of your door, not the color. All our wood doors are raw. 45°-R18-P9 is a mitered door step raised panel design. The rail size is about 2 7/8". The...

    SKU: 45°-R18-P9
    | Face Type: Door | Door Type: Miter 45° | Rail: 45-R18 | Panel: P9 |
  • F-B1-45°-R17-P9 is the drawer front belonging to the door style: B1-45°-R17-P9. It is a mitered step raised panel design with an ogee edge. The rail size is about 2 7/8". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall. Please keep in mind the picture you see is meant to help you... F-B1-45°-R17-P9 is the drawer front belonging to the door style: B1-45°-R17-P9. It is a mitered...

    SKU: F-B1-45°-R17-P9
    | Face Type: Drawer Front | Door Type: Miter 45° | Edge: B1 | Rail: 45-R17 | Panel: P9 |
  • F-45°-R18-P9 is the drawer front belonging to the door style: 45°-R18-P9. It is a mitered step raised panel design. The rail size is about 2 7/8". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall. Please keep in mind the picture you see is meant to help you choose the design of your... F-45°-R18-P9 is the drawer front belonging to the door style: 45°-R18-P9. It is a mitered step...

    SKU: F-45°-R18-P9
    | Face Type: Drawer Front | Door Type: Miter 45° | Rail: 45-R18 | Panel: P9 |
  • F-B7-45°-R22-P10 is the drawer front belonging to the door style: B7-45°-R22-P10. It is a mitered raised panel design with straight edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall. Please keep in mind the picture you see is meant to help you choose... F-B7-45°-R22-P10 is the drawer front belonging to the door style: B7-45°-R22-P10. It is a mitered...

    SKU: F-B7-45°-R22-P10
    | Face Type: Drawer Front | Door Type: Miter 45° | Edge: B7 | Rail: 45-R22 | Panel: P10 |
  • 45°-R18-P10 is a mitered door raised panel design. The rail size is about 2 7/8". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-45°-R18-P10. Please notice the picture you see is meant to help you choose the design of your door, not the color. All our wood doors are raw. 45°-R18-P10 is a mitered door raised panel design. The rail size is about 2 7/8". The thickness...

    SKU: 45°-R18-P10
    | Face Type: Door | Door Type: Miter 45° | Rail: 45-R18 | Panel: P10 |
  • F-45°-R18-P10 is the drawer front belonging to the door style: 45°-R18-P10. It is a mitered door raised panel design. The rail size is about 2 7/8". The thickness of the wood we use is ¾”. Please notice the reduced rails running horizontally measuring about 1 ½” tall. Please keep in mind the picture you see is meant to help you choose the design of your... F-45°-R18-P10 is the drawer front belonging to the door style: 45°-R18-P10. It is a mitered door...

    SKU: F-45°-R18-P10
    | Face Type: Drawer Front | Door Style: Square | Door Type: Miter 45° | Rail: 45-R18 | Panel: P10 |
  • B7-45°-R22-P10 is a mitered door raised panel design with straight edge. The rail size is about 2 1/4". The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B7-45°-R22-P10. Please notice the picture you see is meant to help you choose the design of your door, not the color. All our wood doors are raw. B7-45°-R22-P10 is a mitered door raised panel design with straight edge. The rail size is about 2...

    SKU: B7-45°-R22-P10
    | Face Type: Door | Door Type: Miter 45° | Edge: B7 | Rail: 45-R22 | Panel: P10 |
  • B7-R4-P6-SQ-3INCH usually known as "shaker”.It is a plain and elegant style. The rail size is about 3". The flat panel is made of wood veneer MDF. The thickness of the wood we use is ¾”. The corresponding drawer front for it is F-B7-R4-P6-SQ and you can also make it slab: F-B7-SLAB. Please notice the picture you see is meant to help you choose the design... B7-R4-P6-SQ-3INCH usually known as "shaker”.It is a plain and elegant style. The rail size is...

    SKU: B7-R4-P6-SQ-3" Riel
    | Face Type: Door | Door Style: Square | Door Type: Regular | Edge: B7 | Rail: R4 | Panel: P6 |
Showing 1 - 40 of 66 items